CustomFire Fighting Pipes,Seamless and Welded Steel PipesManufacturerSince 1991

Home / all / Seamless Steel Pipe / Alloy Seamless Pipe /

ASTM A192 Alloy Steel Pipe Boiler Tubes

ASTM A192 Alloy Steel Pipe Boiler Tubes

ASTM A192 Alloy Steel Pipe Boiler Tubes
ASTM A192 Alloy Steel Pipe Boiler TubesASTM A192 Alloy Steel Pipe Boiler TubesASTM A192 Alloy Steel Pipe Boiler TubesASTM A192 Alloy Steel Pipe Boiler TubesASTM A192 Alloy Steel Pipe Boiler Tubes
CategoriesAlloy Seamless Pipe
BrandBAOLAI Steel Pipe Wholesale Manufacturer
ModelASTM A192/ ASME SA192
CertificationISO
GradeA192/ SA192
Outside Diameter1/4" - 4 3/4" [6.35 - 120.65 mm]
Wall Thickness0.02" - 0.375" [0.51 - 9.53 mm]
Length6M/ 12M or Customized
Delivery StateCold Drawn
Test OptionsHydrostatic/ Hardness/ Flattening/ Flaring/ Flange
EndsPlain/ Bevel
UsageHigh-pressure Boiler and Superheater
SurfaceBlack/ Varnish/ Galvanized/ Oiled, etc.
Update TimeNovember 27,2022
Detail Information
Specification
ASTM A192 Boiler Tubes
Heat Treatment:
1)Hot Rolled tubes need not be heat treated.
2)Cold Drawn tubes shall be heat treated after the final cold-finishing at a temperature of 1200°F [650°C] or higher.

Standard Specification:
ASTM:American Society for Testing and Materials
ASME:American Society of Mechanical Engineers
ASTM A192 and ASME SA192, are universal and can be interused, and the contents inside are the same.
Application
ASTM A192 / ASME SA192 is a high pressure seamless carbon steel / manganese boiler tube(working pressure does not exceed 9.8Mpa and the working temperature between 450 ℃ -650 ℃) used in super heaters, water wall panels, heat exchangers, condensers, marine application, refineries, paper pulping, petrochemical applications, pressure vessels, and general engineering applications.
Application
Application
Production Process Introduction

Cold Drawn Seamless Mechanical Tubing (CDS) is a cold drawn 1018/1026 steel tube which offers uniform tolerances, enhanced machinability and increased strength and tolerances compared to hot-rolled products. Produced from hot rolled 1026, the cold drawing process increases the tube's physical properties and offers better tolerances and reduced machining allowances over hot finish seamless.

CDS seamless tube and pipe is produced by piercing hot billets and subsequent rolling which reduces their diameter and elongates them. This material is then passed through a die and over a mandrel plug to produce an accurate size and gauge which is the essence of the cold drawing process.
Cold Drawn Seamless
Example Size
Note: Some of the main specifications are shown below, please contact us for more details.
Out Diameter
Wall Thickness
Inch
mm
mm
1/4"
6.35
0.51/ 0.89/ 1.24/ 1.64
1"
25.4
1.24/ 1.64/ 2.11/ 2.41/ 2.77/ 3.05/ 3.76/ 3.96
2"
50.8
1.64/ 2.11/ 2.41/ 2.77/ 3.05/ 3.76/ 3.96/ 4.78/ 5.56/ 6.35/ 7.14/ 7.95/ 9.53
3"
76.2
1.64/ 2.11/ 2.41/ 2.77/ 3.05/ 3.76/ 3.96/ 4.78/ 5.56/ 6.35/ 7.14/ 7.95/ 9.53
4 3/4"
120.65
5.56/ 6.35/ 7.14/ 7.95/ 9.53
One-stop service to facilitate your purchase
The Baolai Group continues to provide service and support after your purchase. To save you time, we offer you numerous value-added services such as processing, logistics management and testing.
Processing Services:
  • OEM & ODM
  • Protective Coatings
  • Saw and Flame Cutting
  • Beveling, Threading and Grooving

  • For more information, please contact our service team.
More than a manufacturer, we provide a one-stop solution for your business. Get in touch now!
Contact Person
Sales Manager
Name:
Sales Manager
Tel:
0086-022-83377302
0086-15510871616
Email:
Address:
04,9TH FLOOR,NINGTAI PLAZA,NO.1 XIAGUANG ROAD,NANKAI DISTRICT,TIANJIN,CHINA