CustomFire Fighting Pipes,Seamless and Welded Steel PipesManufacturerSince 1991

Home / all / Seamless Steel Pipe / Alloy Seamless Pipe /

ASTM A179 Alloy Steel Pipe Boiler Tubes

ASTM A179 Alloy Steel Pipe Boiler Tubes

ASTM A179 Alloy Steel Pipe Boiler Tubes
ASTM A179 Alloy Steel Pipe Boiler TubesASTM A179 Alloy Steel Pipe Boiler TubesASTM A179 Alloy Steel Pipe Boiler TubesASTM A179 Alloy Steel Pipe Boiler TubesASTM A179 Alloy Steel Pipe Boiler Tubes
CategoriesAlloy Seamless Pipe
BrandBAOLAI Steel Pipe Wholesale Manufacturer
ModelASTM A179/ ASME SA179
CertificationISO
GradeA179/ SA179
Outside Diameter1/4" - 4 3/4" [6.35 - 120.65 mm]
Thickness0.02" - 0.375" [0.51 - 9.53 mm]
Length6M/ 12M or Customized
Delivery StateCold Drawn
Test OptionsHydrostatic/ Hardness/ Flattening/ Flaring/ Flange
EndsPlain/ Bevel
UsageHeat-Exchanger and Condenser Tubes
SurfaceBlack/ Varnish/ Galvanized/ Oiled, etc.
Update TimeDecember 7,2022
Detail Information
Specification
ASTM A179 Seamless Carbon Steel Tubes
ASTM A179 or ASME SA179 tubes is a type of seamless pipe material in carbon, with small wall thickness and diameters. (Most is required below 3 inch.)
It covers seamless cold drawn low carbon steel pipe, for tubular heat exchanger, condensers and other similar heat transfer equipment.
Application
ASTM A179 alloy steel piep usually used in high temperature boiler tubes.
Application
Application
Production Process Introduction
Cold Drawn Seamless Mechanical Tubing (CDS) is a cold drawn 1018/1026 steel tube which offers uniform tolerances, enhanced machinability and increased strength and tolerances compared to hot-rolled products. Produced from hot rolled 1026, the cold drawing process increases the tube's physical properties and offers better tolerances and reduced machining allowances over hot finish seamless.

CDS seamless tube and pipe is produced by piercing hot billets and subsequent rolling which reduces their diameter and elongates them. This material is then passed through a die and over a mandrel plug to produce an accurate size and gauge which is the essence of the cold drawing process.
Cold Drawn Seamless Production Process
Example Size
Note: Some of the main specifications are shown below, please contact us for more details.
Out Diameter
Wall Thickness
Inch
mm
mm
1/4"
6.35
0.51/ 0.89/ 1.24/ 1.64
1"
25.4
1.24/ 1.64/ 2.11/ 2.41/ 2.77/ 3.05/ 3.76/ 3.96
2"
50.8
1.64/ 2.11/ 2.41/ 2.77/ 3.05/ 3.76/ 3.96/ 4.78/ 5.56/ 6.35/ 7.14/ 7.95/ 9.53
3"
76.2
1.64/ 2.11/ 2.41/ 2.77/ 3.05/ 3.76/ 3.96/ 4.78/ 5.56/ 6.35/ 7.14/ 7.95/ 9.53
4 3/4"
120.65
5.56/ 6.35/ 7.14/ 7.95/ 9.53
One-stop service to facilitate your purchase
The Baolai Group continues to provide service and support after your purchase. To save you time, we offer you numerous value-added services such as processing, logistics management and testing.
Processing Services:
  • OEM & ODM
  • Protective Coatings
  • Saw and Flame Cutting
  • Beveling, Threading and Grooving

  • For more information, please contact our service team.
More than a manufacturer, we provide a one-stop solution for your business. Get in touch now!
Contact Person
Sales Manager
Name:
Sales Manager
Tel:
0086-022-83377302
0086-15510871616
Email
Address:
04,9TH FLOOR,NINGTAI PLAZA,NO.1 XIAGUANG ROAD,NANKAI DISTRICT,TIANJIN,CHINA