CustomFire Fighting Pipes,Seamless and Welded Steel PipesManufacturerSince 1991

Home / all / Pipe Accessories & Fittings / Pipe Pump /

FM Approved Fire Pump Test Flow Meter Wholesaler

FM Approved Fire Pump Test Flow Meter Wholesaler

FM Approved Fire Pump Test Flow Meter Wholesaler
FM Approved Fire Pump Test Flow Meter WholesalerFM Approved Fire Pump Test Flow Meter WholesalerFM Approved Fire Pump Test Flow Meter Wholesaler
CategoriesPipe Pump
BrandBAOLAI Steel Pipe Wholesale Manufacturer
ModelNFPA 20
CertificateFM / LPCB Approved
Size3''-8''
ConnectionWafer/ Grooved
Accuracy± 2%
InstallationHorizontal / vertical
W. pressure290 psi (2.0 MPa)
Update TimeDecember 9,2022
Detail Information
Specification
FM Fire Pump Test Flow Meter
Flowmeter for fire pump is mainly used to measure the volume flow of conductive liquid and slurry in closed pipes. Including acid, alkali, salt and other highly corrosive liquids.

Fire pump flowmeters may be used to determine the discharge of a fire pump. Water from the pump is temporarily directed through
the flowmeter, then to atmospheric drain or back to the water supply source.
It is important that the flowmeter not be connected directly back to the pump suction. This arrangement does not adequately test the
condition of the water supply.
These flowmeters are calibrated to measure the fire pump output directly in gal/min (dm3 /min). A control valve is provided in the
flowmeter line. This valve must be completely closed, except when the flowmeter is in use. Unless otherwise noted in the listing, these
systems have 175 psi (1205 kPa) rated working pressure. 
Example size
Note: Some of the main specifications are shown below, please contact us for more details.
Size
Pump capacity (gpm)
Test range (gpm)
Connection
Ref. NO.
Inch
DN
3''
80
200
100-400
Wafer FLG/ GRV
U3101
4''
100
250
150-500
Wafer FLG/ GRV
U3102
4''
100
300
150-600
Wafer FLG/ GRV
U3103
4''
100
450
250-900
Wafer FLG/ GRV
U3104
6''
150
500
250-1000
Wafer FLG/ GRV
U3105
One-stop service to facilitate your purchase
The Baolai Group continues to provide service and support after your purchase. To save you time, we offer you numerous value-added services such as processing, logistics management and testing.
Processing Services:
  • OEM & ODM
  • Protective Coatings
  • Saw and Flame Cutting
  • Beveling, Threading and Grooving

  • For more information, please contact our service team.
More than a manufacturer, we provide a one-stop solution for your business. Get in touch now!
Contact Person
Sales Manager
Name:
Sales Manager
Tel:
0086-022-83377302
0086-15510871616
Email
Address:
04,9TH FLOOR,NINGTAI PLAZA,NO.1 XIAGUANG ROAD,NANKAI DISTRICT,TIANJIN,CHINA